Home > Chromatography - HPLC >

Agilent 1200 HPLC G1367B High Performance Autosampler

Net 30 Terms and Financing Available

Our Price: $6,995.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 2 Business Days
Included Documentation: Lab Advisor Documentation

Request a Formal Quote

Quantity in Stock:2

Product Code: AG-1367B

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Agilent 1200 HPLC G1367B High Performance Autosampler

The Agilent 1200 HPLC G1367B High Performance Autosampler adds maximum flexibility and fast injection cycles to your Agilent HPLC system. Whenever high sample throughput and speed of analysis are points to consider, the G1367B is the autosampler to choose. Featuring a standard injection range from 0.1 to 100 μl, the G1367B Autosampler provides increased sample injection speed for high sample throughput. Other features include: overlapped injections for increased productivity, minimal delay volumes for rapid gradients and fast equilibration when bypassing the autosampler after sample injection, flexible and convenient sample handling with different types of sample containers.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Agilent 1200 HPLC G1367B High Performance Autosampler includes:

> Firmware Version 07.02 (Can be changed upon request)
> Vial Tray
> Lab Advisor Documentation
> Lan Cable / Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Agilent 1200 HPLC G1367B High Performance Autosampler Specifications

GLP Features	Early maintainece feedback (EMF), electronic records of maintainence and errors
Communications	Controller-area network (CAN). RS232C, APG remote standard, optional four external contact closures and BCD vial number output
Safety Features	Leak detection and safe leak handling, low voltages in maintence areas, error detection and display
Injection Range	0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)
Precision	Typically < 0.25 % RSD from 5 – 100 µl, Typically < 1 % RSD from 1 – 5 µl
Pressure Range	400 bar (5800 psi)
Sample Viscosity Range	0.2 – 5 cp
Sample Capacity	2 × well-plates (MTP) + 10 × 2 ml vials 108 x 2 ml vials in 2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials 54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x 27 Eppendorf tube plate
Injection Cycle Time	Typically < 30 s using following standard conditions: Default draw speed: 200 µl/min Default eject speed: 200 µl/min Injection volume: 5 µl
Carry-Over	Typically < 0.01 % using the following conditions: Column: 125 x 4 mm Hypersil ODS, 5 µm Mobile phase: Water/Acetonitrile = 80/20 Flow rate: 1 ml/min Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port