Home > Chromatography - HPLC >

Agilent 1200 HPLC G1364C Fraction Collector

Net 30 Terms and Financing Available

Our Price: $6,995.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 2 Business Days
Included Documentation: Delay Volume Detection and Lab Advisor Report

Request a Formal Quote

Quantity in Stock:1

Product Code: AG-FCOL1200

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Agilent 1200 HPLC G1364C Fraction Collector

The Agilent 1200 HPLC G1364C Fraction Collector is designed for optimized fraction collection capability without compromises. Users can choose between three dedicated fraction collectors depending on sample amount, flow rate, and the types of collection containers.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Agilent 1200 HPLC G1364C Fraction Collector includes:

> Firmware Version 07.02 (Can be changed upon request)
> Tray
> Delay Volume Detection and Lab Advisor Diagnostic Report
> Lan Cable / Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Agilent 1200 HPLC G1364C Fraction Collector Specifications

Trigger Modes	Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
Operating Modes	Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
Test Tube/Plate Sizes	Minimum 48 mm to 75 mm maximum
Maximum Tube Volume	ca. 45 ml
Maximum Flow Rate	100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
Delay Volumes [μl]	Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing) Diverter valve: ~15 Diverter valve to needle: ~110 Needle: -~5
Delay Calibration Sensor	Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
Diverter Valve	3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
Maximum Capacity	3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
Interfaces	Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
Safety Features	Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors