|
Weight
|
14.2 kg (31.3 lbs)
|
|
Dimensions (H x W x D)
|
200 x 345 x 435 mm (8 x 13.5 x 17 in)
|
|
Line Voltage
Line frequency
|
100 – 120 or 220 – 240 VAC, ± 10 %
50 or 60 Hz, ± 5 %
|
|
Power consumption (apparent power)
Power consumption (active power)
|
300 VA max.
200 W max.
|
|
Ambient operating temperature
Ambient non-operating temperature
|
4 – 55 °C (41 – 131 °F)
40 to 70 °C (-4 to 158 °F)
|
|
Humidity
|
< 95 %, at 25 – 40 °C (77 – 104 °F) non-condensing
|
|
Tray
|
Thermostattable Tray for 100 x 2 ml vials Microvials (100
or 300 µl) with sleeves (reduced cooling performance with microvials)
|
|
Settable injection volume
|
0.01 to 8 µl with small loop capillary
0.01 to 40 µl with extended loop capillary
|
|
Precision
|
Typically < 0.5 % RSD from 5 to 40 µl Typically < 1
% RSD from 1 to 5 µl Typically < 3 % RSD from 0.2 to 1 µl
|
|
Minimum sample volume
|
1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10
µl sample in 300 µl microvials
|
|
Carryover
|
Typically < 0.1 % without automated needle wash
Typically < 0.05 % with external needle cleaning and 1 µl injection volume
|
|
Sample viscosity range
|
0.2 - 5 cp
|
|
Recommended pH-range
|
1.0 - 8.5 solvent with pH < 2.3 should not contain
acids which attack stainless steel. Upper pH range is limited by fused silica
capillaries
|
|
Material in contact with solvent
|
Stainless steel, sapphire, PTFE, PEEK, fused silica,
Vespel
|
|
GLP features
|
Early maintenance feedback (EMF), electronic records of
maintenance and errors
|
|
Communications
|
Controller-area network (CAN), GPIB (IEEE-448), RS232C,
APG-remote standard, optional four external contact closures and BCD vial
number output
|
|
Housing
|
All materials are recyclable
|
