Home > Chromatography - HPLC >

Agilent 1100 HPLC G1367A Autosampler

Net 30 Terms and Financing Available

Our Price: $5,735.00

Sale Price: $4,575.00

Money Saved: $1,160.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 2 Business Days
Included Documentation: Lab Advisor Documentation

Request a Formal Quote

Quantity in Stock:1

Product Code: AG-ALAAS

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Agilent 1100 HPLC G1367A Autosampler

The Agilent 1100 G1367A Autosampler adds maximum flexibility and fast injection cycles to your Agilent HPLC system. Whenever high sample throughput and speed of analysis are points to consider, the G1367A is the autosampler to choose.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Agilent 1100 HPLC G1367A Autosampler includes:

> Firmware Version 07.02 (Can be changed upon request)
> Vial Tray (Please Inquire for Well Plate Tray)
> Lab Advisor Documentation
> Lan Cable / Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Agilent 1100 HPLC G1367A Autosampler Specifications

GLP Features	Early maintainece feedback (EMF), electronic records of maintainence and errors
Communications	Controller-area network (CAN). RS232C, APG remote standard, optional four external contact closures and BCD vial number output
Safety Features	Leak detection and safe leak handling, low voltages in maintence areas, error detection and display
Injection Range	0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)
Precision	Typically < 0.5 % RSD of peak areas from 5 – 100 µl, Typically < 1 % RSD from 1 – 5 µl
Sample Viscosity Range	0.2 – 5 cp
Sample Capacity	2 × well-plates (MTP) + 10 × 2 ml vials [Not Included] 100 x 2 ml in one tray 40 x 2 ml in half tray [Included]
Injection Cycle Time	Typically < 30 s using following standard conditions: Default draw speed: 200 µl/min Default eject speed: 200 µl/min Injection volume: 5 µl
Carry-Over	Typically < 0.01 % using the following conditions: Column: 125 x 4 mm Hypersil ODS, 5 µm Mobile phase: Water/Acetonitrile = 80/20 Flow rate: 1 ml/min Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port