 |
 |
 |
|
ABI 9800 Fast Thermal Cycler
The ABI 9800 Fast Thermal Cycler is the first integrated system optimized for trouble-free fast PCR performance. The 9800 Fast Thermal Cycler reduces PCR reaction time from 2 hours to under 25 minutes with the featured fast ramp mode. Other features include the superior reproducibility with uniform heating and cooling, the integrated 96-well system for fast results, and the convenient master mix that delivers consistent performance when it counts the most.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The ABI 9800 Fast Thermal Cycler includes:
- > 96 Well Block
- > Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
ABI 9800 Fast Thermal Cycler Specifications
|
Temperature Accuracy
|
±0.25°C (35° – 100°C)
|
|
Temperature Range
|
4.0° to 100°C
|
|
Dimensions (H x W x D)
|
26 x 30 x 52 cm
|
|
Ramp Modes
|
Fast or Standard Mode
|
|
Ramp Speed
|
Heating: 5.0°C/seconds
Cooling: 4.1°C/seconds
|
|
Cycle Speed
|
< 10 minutes to uniformity cycle samples from 94°C, 0 seconds to
64°C, 0 seconds, 25 times
|
|
Weight
|
12 kg
|
ABI 9800 Fast Thermal Cycler Manual
 Click Here to View the Technical Specs for the ABI 9800 Fast Thermal Cycler
- Validate that the power supply and PCB consistently deliver accurate, stable voltages across all circuits and connections, confirming operational reliability
- Thoroughly inspect the display for any dim, flickering, or dead pixels, replacing compromised segments to ensure clear visibility and precise data display
- Verify complete functionality and responsiveness of all buttons and knobs, confirming accurate and reliable input across all controls
- Ensure the machine completes all internal diagnostic checks with zero errors, indicating system readiness and functional integrity
- Confirm the machine accurately identifies attached blocks (96-well, dual 48, etc.), with seamless recognition across different configurations
- Conduct a detailed inspection of internal wiring and all electrical connections, checking for any signs of breaks, disconnections, or tears; replace or repair any underperforming components
- Examine the connector between the block and base for bent or broken pins, replacing as needed to maintain secure, reliable connections
- Calibrate well temperatures with a NIST-traceable thermometer, verifying accuracy and uniformity across all wells to meet specification standards
- Perform a comprehensive cosmetic inspection, ensuring all exterior surfaces and components are free of damage, wear, or defects, maintaining aesthetic and professional quality
Technician Inspection and Recertification Checklist: Thermal Cycler
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Validate stable, accurate voltage outputs from power supply and PCB across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace as needed for clarity
|
Completed
|
|
|
Verify functionality and responsiveness of all buttons and knobs
|
Completed
|
|
|
Confirm machine completes internal diagnostics with zero errors
|
Completed
|
|
|
Ensure accurate block identification across configurations (96-well, dual 48, etc.)
|
Completed
|
|
|
Inspect internal wiring and connections for integrity; repair or replace as needed
|
Completed
|
|
|
Check connector between block and base for bent or broken pins; replace as necessary
|
Completed
|
|
|
Calibrate well temperatures with a NIST-traceable thermometer for accuracy
|
Completed
|
|
|
Conduct cosmetic inspection to ensure quality and professionalism of all surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
