Stock Notification!

The Tuttnauer EZ10 Digital Autoclave you were interested in is currently unavailable, but we have found a great alternative at an excellent price!

Our Price: $5,330.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days

Request a Formal Quote

Quantity in Stock:

Product Code: TU-EZ10

Qty:

Email me when Back-In-Stock

Description

Recertification Protocol

Technical Specification Sheet

Tuttnauer EZ10 Autoclave

The Tuttnauer EZ10 is a fully automatic autoclave with one touch design for all of your sterilization and drying needs. Its closed door active drying system maintains sterility and ensures efficient drying of packs and pouches. The high efficiency air pump circulates hot air after the sterilization cycle for fast drying. The EZ10 features HEPA 0.2 m replaceable air filter and pre-loaded cycles for unwrapped instruments, wrapped instruments/packs, glassware, along with an additional drying cycle. All program parameters can be customized and stored for future use. The EZ10 utilizes automatic shut off at the end of both the sterilization and dry cycles with audible and visual cycle interruption alerts. Safety features include a double safety locking device, which prevents door from opening while chamber is pressurized, and a low water sensor, which prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir. Constant monitoring of temperature and pressure for sterilization ensures proper parameters for each run. Door design prevents steam from coming in contact with control panel. 510k clearance for dental handpieces. Power outage recovery system. Drain valve is located on the front, allowing for quick and easy draining of water reservoir.

All of our equipment is in excellent condition and will be fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Tuttnauer EZ10 Digital Autoclave includes:

> Operator's Guide
> Power Cord
> Full 180 Day Parts and Labor Warranty

Tuttnauer EZ10 Autoclave Specifications

Chamber Volume	23 L (6 gal)
Chamber Size (Diameter x Depth)	10 x 19 in
Temperature Range	100 to 134C
Standard Cassettes Capacity	3 full / 3 half
Number of Trays	4
Tray Dimensions (W x D x H)	6.7 x 16.3 x 0.8 in
Overall Dimensions (W x D x H)	20 x 14.4 x 21.5 mm
Electrical Requirements	120V, 11.7A, 1400W

Tuttnauer EZ10 Manual

Click Here to View all the Technical Specs for the EZ10

Request a Formal Quote

Autoclave Inspection and Recertification Checklist

Verify power supply output to ensure precise voltage delivery as per equipment specifications
Check full display functionality, replacing any dead or dim pixels for optimal clarity
Confirm unit is level to maintain stability and accurate operational performance
Inspect door seal integrity, replacing if any wear or damage compromises airtight performance
Examine and clean both external and internal filters to ensure unobstructed airflow and system efficiency
Execute comprehensive cycle testing to validate consistent operation
Verify printer functionality (if applicable) to ensure precise print outputs without error
Assess internal plumbing system for any leaks or pressure inconsistencies
Inspect all electrical connections and wiring for secure attachment and optimal conductivity
Verify functionality of internal switches to ensure reliable engagement and operational control
Inspect and clean the water reservoir to maintain purity and prevent contamination
Confirm accuracy of pressure readings, recalibrating if deviations are identified
Perform final test cycles, ensuring zero errors for validated operational readiness

Technician Inspection and Recertification Checklist: Autoclaves

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Verify power supply output voltages	Completed
Check display functionality and replace dead/dim pixels	Completed
Confirm unit leveling for stability	Completed
Inspect and replace damaged door seal	Completed
Clean external and internal filters for airflow efficiency	Completed
Conduct comprehensive cycle testing	Completed
Confirm printer functionality (if applicable)	Completed
Assess plumbing for leaks or pressure issues	Completed
Inspect electrical connections for secure and optimal conductivity	Completed
Verify internal switch functionality	Completed
Inspect and clean water reservoir	Completed
Confirm pressure reading accuracy and recalibrate if needed	Completed
Perform final test cycles with zero errors	Completed